In the IPSec SA Lifetime field, enter the time in seconds that the VPN connection remains active in Phase 2. (Optional) If Subnet was chosen in Step 10, enter the subnet mask of the local network in the Subnet Mask field. If Single was chosen in Step 10, enter the IP address of the single user and skip to Step 13. If Subnet was chosen in Step 10, enter the Network IP address of the sub-network in the IP Address field. From the Local IP drop down list, choose Single if you would like a single local LAN user to access the VPN tunnel, or choose Subnet if you would like multiple users to be able to access it. Once this time expires, a new key is negotiated automatically. In the IKE SA Life Time field, enter the time, in seconds, that the automatic IKE key is valid. Group5 (1536-bit) - Computes the key the slowest, but is the most secure.Group2 (1024-bit) - Computes the key slower, but is more secure than Group1.Group1 (768-bit) - Computes the key the fastest, but is the least secure.The strength of the algorithm is determined by bits.
Diffie-Hellman is a cryptographic key exchange protocol which is used in the connection to exchange pre-shared key sets.
From the DH Group drop-down list, choose the appropriate Diffie-Hellman (DH) group to be used with the key in Phase 1.
AES-128 is faster but less secure than AES-192 and AES-256. In general, AES is also faster and more secure than 3DES.
#CISCO IPSEC VPN CLIENT WINDOWS 10 HOW TO#
Note: For more information about how to configure NAT Traversal settings, refer to Internet Key Exchange (IKE) Policy Settings on RV130 and RV130W VPN Routers. (Optional) If your VPN router or VPN Client is behind a NAT gateway, click Edit to configure NAT Traversal. Check the Server Enable checkbox to enable the certificate. Log in to the web configuration utility and choose VPN > IPSec VPN Server > Setup. Note: For information about how to configure an IPSec VPN Server with the Shrew Soft VPN Client on RV130 and RV130W, refer to the article Use Shrew Soft VPN Client with IPSec VPN Server on RV130 and RV130W. The objective of this document is to show you how to configure an IPSec VPN Server on RV130 and RV130W. IPSec VPN (Virtual Private Network) enables you to securely obtain remote access to corporate resources by establishing an encrypted tunnel across the Internet. Configuration of an IPSec VPN Server on RV130 and RV130W Objective